【wuzhijun0301】 在 https://github.com/istoreos/istoreos/issues/922 发布：
反馈bug/问题模板，提建议请删除
1.关于你要提交的问题
n100 i226 esxi中显示协商2.5G 但是istoreos中显示1G
路由器是ax86u pro 接的2.5G口，esxi中已经显示是2.5g
istoreos中显示1g
Q：是否用关键词搜索了issue? (使用 “x” 选择)
没有类似的issue
2. 详细叙述
(1) 具体问题
如上面描述
(2) 路由器型号和固件版本
路由器：AX86U PRO 2.5g口
固件：22.03.5 2023072811
硬件：N100 i226-v 2.5g
(3) 详细日志和/或截图
ethtool -i eth0
driver: e1000
version: 5.10.176
firmware-version:
expansion-rom-version:
bus-info: 0000:02:01.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
root@iStoreOS:~ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
搜索了所有的issue，实在没有思路了，望请帮忙看看